Victron Energy Interfacing
Considerations and installation guides to interface Redflow ZCell/ZBM2 energy storage products into an energy system built using Victron Energy products.
- Additional DC Capacitors required for MultiPlus-II product series when used with Redflow ZBM2/ZCell batteries
- Configure BMS to update system SoC to a CCGX using MODBUS-TCP (superseded)
- Recommended initial commissioning sequence for large systems (multiple Victron Energy inverter/chargers per phase)
- Interfacing large more than 16 batteries using a Master/Slave BMS structure
- Connecting CANBus between an original Redflow BMS and a Victron Energy CCGX
- Installation guide to connecting a Redflow battery array to a Victron Energy system
- Connecting CANBus between current Redflow BMS hardware and a Victron Energy CCGX